DLTSN600 series-Heat resistant super alloy end mill
Literal stament
High temperature alloy cutting force, high cutting temperature and concentration in the blade near, prone to chipping and plastic deformation, and usually takes K and toughness and excellent high temperature performance good thermal conductivity of S alloy.
Feature
Special edge design,guarantees high rigidity and reduces vibration.
Special disposing of end cutting edge,improves edge strength and guaratees surface quelity.
High pressure water or gas cooling is the best cooling methods.
Regular size:
Corner radius 4 flute HRSA
|
Ordering code |
D |
r |
Lc |
L |
d |
|
DLTSN600-R4-06005 |
6 |
0.5 |
15 |
50 |
6 |
|
DLTSN600-R4-08010 |
8 |
1 |
20 |
60 |
8 |
|
DLTSN600-R4-10010 |
10 |
1 |
25 |
75 |
10 |
|
DLTSN600-R4-12010 |
12 |
1 |
30 |
75 |
12 |
|
DLTSN600-R4-16010 |
16 |
1 |
32 |
100 |
16 |
Ball nose 4 flute HRSA
|
Ordering code |
D |
R |
Lc |
L |
d |
|
DLTSN600-B4-06012 |
6 |
3 |
12 |
50 |
6 |
|
DLTSN600-B4-08014 |
8 |
4 |
14 |
60 |
8 |
|
DLTSN600-B4-10018 |
10 |
5 |
18 |
75 |
10 |
|
DLTSN600-B4-12022 |
12 |
6 |
22 |
75 |
12 |
|
DLTSN600-B4-16026 |
16 |
8 |
26 |
90 |
16 |
Tool material composition:
1.Physical Properties:
A) Hardness greater than or equal to 92.8 HRA；
B) Density greater than or equal to 14.2 g/cm³；
C) TRS greater than or equal to 4200 N/mm²；
2.All the tools of production, coatings are used in Germany, Switzerland, processing equipment；
Coating:
Nano Coating AlTiN
Characteristics and Function
1、High aluminum content provides excellent hot hardness and oxidation resistance.
2、Special method optimizes the structure of coating,sighficantly improvedstability,reducing the number of surface droplet.
Attention:
1、Make sure workpiece and machine are suitable,use high quality collect chucks.
2、Please adjust the speed,feed and cutting depth according to actual cutting conditions.
3、The milling conditiongs are for an end mill where the tool overhang length is less than 4*D(mill dia).
When the tool overhang length is longer, please adjust the speed,feed and cutting depth.
4、If corner radius is >15% of D then ap=-30%,fz=-20%.